Another experiment with rapidly speeding up LFOs—this time with more high-frequency content.
Select any preset on the microKORG, then send the sysex data from the patches here using a MIDI system exclusive utility for your computer. The patch should load in “audition” mode on the microKORG. Play and tweak as needed, then save the new sound using the “Write” button.
If nothing happens when transmitting the sysex data, try setting the microKORG to receive on a different MIDI channel.
Synth/Vocoder: | Synth |
Single/Layer: | Single |
Voice Assign: | Poly |
Transpose: | 0 |
Tune: | 0 |
Portamento: | 0 |
Bend Range: | 2 |
Vibrato Int: | 0 |
Wave: | Saw |
Control 1: | 103 |
Control 2: | 42 |
Wave: | Square |
Oscillator Mod: | Ring Sync |
Semitone: | 5 |
Tune: | 25 |
OSC 1 Level: | 127 |
OSC 2/Inst Level: | 80 |
Noise Level: | 0 |
Type: | -12dB LPF |
Cutoff: | 16 |
Resonance: | 35 |
Filter EG Int: | 47 |
Filter Key Track: | 28 |
Attack: | 111 |
Decay: | 108 |
Sustain: | 41 |
Release: | 66 |
EG Reset: | Off |
Level: | 127 |
Panpot: | 0 |
Distortion: | Off |
Keybd Track: | 0 |
Attack: | 58 |
Decay: | 117 |
Sustain: | 21 |
Release: | 78 |
EG Reset: | On |
Wave: | Triangle |
Key Sync: | Timbre |
Tempo Sync: | On |
Sync Note: | 3/16 |
Wave: | Square 2 |
Key Sync: | Voice |
Tempo Sync: | Off |
Frequency: | 46 |
Source: | LFO 1 |
Destination: | OSC2 Tune |
Mod Int: | 34 |
Source: | LFO 2 |
Destination: | Pan |
Mod Int: | 49 |
Source: | Amp EG |
Destination: | OSC1 Control1 |
Mod Int: | -14 |
Source: | Mod Wheel |
Destination: | LFO2 Frequency |
Mod Int: | 57 |
Type: | Phaser |
LFO Speed: | 10 |
Effect Depth: | 27 |
Type: | Cross Delay |
Tempo Sync: | On |
Sync Note: | 1/24 |
Delay Depth: | 12 |
Low EQ Freq: | 320Hz |
Low EQ Gain: | 0 |
Hi EQ Freq: | 6kHz |
Hi EQ Gain: | 0 |
Tempo: | 120 |
Resolution: | 1/16 |
Gate: | 80 |
Type: | Up |
Range: | 1 |
Latch: | Off |
Swing: | 0 |
Key Sync: | Off |
Last Step: | 8 |
Enabled: | Off |